Jøtul GF 305 DV IPI Installation And Operation Instructions Manual page 25

Log 3 Locator pins
1
Step 2.
Engage Base Rocks 1 and 2 with the burner locator
pins shown in Step 1, page 23. Note pins for logs 3 and 4.
Step 4.
• Engage the Upper Logs
5 and 6 with the adjacent
pins on the lower logs.
• Use a tooth brush to
sparingly spread a thin,
porous layer of rock wool
tufts over the front area
of the burner base.
PROPANE NOTE:
Soot may develop
with Propane fuel
in minimum vent
configurations.
Should soot occur,
remove the rock
wool.
8
Step 5.
Place Stones 7 and 8 in their respective pockets on the base.
Log 4 Locator pins
2
5
Sparingly apply rock wool to this area.
7
Log 5 Locator pins
3
Step 3.
Engage the Lower Logs 3 and 4 with the adjacent
log locators on the rocks. Note pins for logs 5 and 6.
Step 6.
Place Stone 9 on the base.
139843_A GF 305 DV IPI 8/17
Log 6 Locator pins
4
6
9
25