Network Connection (Rj45) - ADS-tec OPC8008 Instruction Manual

OPC8000 series

7.4 Network connection (RJ45)

If the drivers required for functioning are installed on the device, the control system may be
integrated in an Ethernet network supporting the 10/100/1000Mbit standard by using the
Ethernet 10/100/1000BaseT network connector. The specifications of this network topology
must be observed. If the drivers required for function are not installed, they can be installed
from the website (www.ads-tec.de).
10/100Mbit
Pin-Number
1
2
3
4
5
6
7
8
1000 BaseT
Pin-Number
1
2
3
4
5
6
7
8
Pos : 32 /D atentec hni k/Schnitts tell en/Funknetz wer kkar te/Funknetz wer kkarte für VMT 6000 Serie @ 2\mod_1260517076470_6.doc @ 6872 @
Pos : 33 /D atentec hni k/Schnitts tell en/Seriell e Schnitts tell e C OM RS232/Serielle Sc hnitts tell e C OM (RS232) für VMT 60xx @ 1 \mod_1246373571514_6.doc @ 5876 @
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
Signal-Name
TX +
TX -
RX +
NC
NC
RX -
NC
NC
Signal-Name
D1+
D1-
D2+
D3+
D3-
D2-
D4+
D4-
45