Opening The Service Slot (Opc8013-8022) - ADS-tec OPC8008 Instruction Manual

OPC8000 series 54

12.2 Opening the service slot (OPC8013-8022)

Remove the four screws for the service slot on the rear of the device. The screws can be
removed with a size Tx 10 screwdriver. The rear cover can be tilted forward and removed
using the groove on the top side of the service slot.
Fig. 15:
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen