Table of Contents
Advertisement
OPC8000 series
4
1 Notes
1.1 General remark
This instruction manual is intended to ensure safe and efficient handling of the device. It must
be accessible to all persons who are involved in installation and commissioning of the device
and must be read and understood before any work is started.
The instruction manual must be passed on to the device/system operator after commissioning
has been completed.
All of the safety notices and handling instructions given in the manual must be obeyed in order
to ensure that work is carried out safely.
Figures used in this instruction manual are provided for basic understanding and may differ
from the actual design.
The original version of this instruction manual was written in German. All non-German versions
of this instruction manual are translations of the German instruction manual.
1.2 Limitation of liability
ADS-TEC GmbH shall not be liable for personal injury, property damage or damage caused to
the device as well as consequential damage that is/was the result of non-compliance with this
instruction manual, improper use of the device, repairs and other actions on the device by
unqualified electricians and electricians not certified by ADS-TEC, or that is/was the result of
using unapproved replacement parts. Failure to observe the maintenance intervals shall also
result in exclusion from liability.
Furthermore, it is strictly forbidden to make any unauthorised alterations or technical
modifications to the device.
1.3 Manufacturer
The manufacturer of the product is ADS-TEC GmbH. The company is referred to in the
following as ADS-TEC.
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
Advertisement
Table of Contents
