Activating The Front Keys For The Boot Menu And Bios - ADS-tec OPC8008 Instruction Manual

OPC8000 series

6.1.3 Activating the front keys for the boot menu and BIOS

You can use the front keys to enter the boot menu and the BIOS, to navigate in these menus
and to make settings. In order to do so, you have to activate this function in the BIOS:
Advanced  EC-Firmware Configuration  Frontkey Navigation = [Enabled]
How to enter the BIOS:
1. Connect a hardware keyboard to your computer.
2. Switch the computer on.
3. Immediately after switching on, press several times the Del key until the BIOS setup
opens up.
After having activated the front keys, you can enter the boot menu immediately after switching
the computer on by pressing several times the key with the two rectangles
menu, you can also enter the BIOS setup (choose "Enter setup").
Then, the front keys have the following functions:
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
This key reacts like the Enter key on a real keyboard.
While booting: opens the Boot menu.
In the BIOS setup: leave a menu ( ≙ Esc).
Level 1: reacts like the Up key
Level 2: reacts like the Left-Key
Level 1: reacts like the Down key
Level 2: reacts like the Right-Key
SHIFT key for activating the second keyboard level. The key
has to be pressed shortly and is activated permanently (it
can be recognized via the blue highlighted keys). By
pressing the Fn-key again, the Fn-function is disabled.
41
. Via the boot