Table of Contents
Advertisement
Chapter Overview
This chapter provides disassembly and assembly
procedures for the operator enclosure assembly.
Personal Safety
Improper or incomplete maintenance/repair of a Rubber
Track Loader can be dangerous and may result in ma-
chine damage, injury or death.
Do not attempt to perform any type of repair or mainten-
ance on a Rubber Track Loader until you have read and
fully understood the information in this manual.
Refer to the Operation and Maintenance manual for in-
structions regarding proper machine operation techniques
before operating any Rubber Track Loader.
Prior to performing any type of service work on a
Rubber Track Loader, read and understand Chapter
1 (Product Safety) for personal safety information.
Machine Preparation
Accidental machine starting can cause injury or
death to personnel working on a Rubber Track
Loader.
As a precaution, disconnect the battery cables from
the battery terminals, tape the battery clamps and
remove the key from the ignition switch prior to per-
forming any service work on a Rubber Track Loader.
Place a "Do Not Operate" tag prominently on the
machine to inform personnel that the machine is be-
ing worked on.
5. Operator Enclosure
Disassembly and Assembly
Operator Enclosure
Disassembly and Assembly
Procedures
Disassembly and assembly procedures are provided
for the following operator enclosure components.
•
Light Bar
•
Ignition Switch
•
Gauges
•
Lap Bar Gas Assist Spring
Note: Procedures are provided for only those operator
enclosure components listed above. However, information
for removal and installation of other operator enclosure
components can be obtained from the machine specific
parts manual.
Light Bar Removal and
Installation
The tools required for light bar console removal and
installation are listed in Table 5-1. Use manufacturer
recommended tools whenever possible.
Table 5-1
Required Tools
Combination Wrench
Light Bar Removal
Figure 5-1
1. Loosen the two cap screws that attach the light
bar to the cab frame.
5-1
Advertisement
Table of Contents
