Table of Contents
Advertisement
Chapter Overview
This chapter provides disassembly and assembly
procedures for the radiator/oil cooler assembly. Ad-
justment procedures are also included for selected
radiator/oil cooler components.
Personal Safety
Improper or incomplete maintenance/repair of a Rubber
Track Loader can be dangerous and may result in ma-
chine damage, injury or death.
Do not attempt to perform any type of repair or mainten-
ance on a Rubber Track Loader until you have read and
fully understood the information in this manual.
Refer to the Operation and Maintenance manual for in-
structions regarding proper machine operation techniques
before operating any Rubber Track Loader.
Prior to performing any type of service work on a
Rubber Track Loader, read and understand Chapter
1 (Product Safety) for personal safety information.
Machine Preparation
Accidental machine starting can cause injury or
death to personnel working on a Rubber Track
Loader.
As a precaution, disconnect the battery cables from
the battery terminals, tape the battery clamps and
remove the key from the ignition switch prior to per-
forming any service work on a Rubber Track Loader.
Place a "Do Not Operate" tag prominently on the
machine to inform personnel that the machine is be-
ing worked on.
7. Radiator/Oil Cooler
Disassembly and Assembly
Radiator/Oil Cooler
Disassembly and Assembly
Procedures
Disassembly and assembly procedures are provided
for the following radiator/oil cooler components.
•
Fan Guard
•
Radiator/Cooler
Note: Procedures are provided for only those radiator/oil
cooler components listed above. However, information for
removal and installation of other radiator/oil cooler compo-
nents can be obtained from the machine specific parts
manual.
Note: Refer to Figure 3-1 for an overview of the filtering
and cooling system.
Fan Guard Removal and In-
stallation
The tools required for fan guard removal and instal-
lations are listed in Table 7-1. Use manufacturer-
recommended tools whenever possible.
Table 7-1
Required Tools
Combination Wrench
7-1
Advertisement
Table of Contents
