Radiator/Cooler Installation - Terex PT-50 Service Manual

Rubber Track Loader
7. Radiator/Oil Cooler Disassembly and Assembly
7. Remove the three mounting bolts on each side
of the radiator/cooler.
Figure 7-8
8. Remove the radiator/cooler from the engine
compartment.

Radiator/Cooler Installation

Figure 7-9
1. Install the engine shroud, and position the radia-
tor/cooler in the engine compartment.
Install Bolts
Figure 7-10
2. With the radiator/cooler in position, install the
three mounting bolts on each side of the radia-
tor/cooler.
Figure 7-11
3. Remove the hose and fitting caps and install the
lower hose on the radiator section.
Figure 7-12
7-4