11-1
Trips and Fault Finding
Chapter 11
The drive may trip in order to protect itself. To restart the drive, you will need to clear the trip(s).
This chapter provides a list of trips, as displayed by the 6511 keypad and 6901 keypad.
♦
Trips
What happens when a trip occurs
Resetting a trip condition
Trips Table
Trips Table for the 890CS
Alert Messages
Trips and Fault Finding
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
♦
Fault finding
Control board STATUS LED indications