Kalfire GP75/59F User Manual page 19

5.3 Adjust the frequency of the NSG sparks
The NSG functions only when the gas fire is hot. This is why the appliance only activates the
NSG after it has been operating for 10 minutes.
The NSG generates sparks according to the flame height: as a
result, the higher the flames (maximum setting), the more
sparks. The default setting of the fire is 'SPo' (sparks off). Once
the fire is in use, it saves the last programme selected.
Adjusting the frequency of the sparks
Select the forward arrow button ( ) to access the NSG
programme. The screen displays ' SPo' at the top left. Using the
+ or – buttons, you can change this by selecting from settings
SPo to SP8.
19