4.4
Activating/deactivating the flames in manual mode
1.
Hold down the
begins flashing.
2.
While holding
ignition.
'WARM', displayed at the top left of the screen, begins to
flash, indicating that the request has been confirmed.
After several seconds, a beep indicates that ignition is
starting up and 'WAIT' displays on the screen. After about 20
seconds, the burner ignites.
A beep confirms the completion of ignition and 'WAIT' stops
flashing.
The fire is on.
3.
To switch off the fire, hold down the
button until 'OK' at the top left of the screen
down, briefly press
to activate automatic
button for around 2 seconds.
13