Extron electronics DTP CrossPoint 4K Series User Manual page 85

Command and Response Table for Matrix Switcher Commands (continued)
Command Function
Information requests, continued
Request system status
NOTE: The " " portion of the response appears only when the switcher is in Verbose mode 2 or 3.
Sts00*
Response description: Power supply
Example:
View and erase file directory
NOTE: The response to the View File Directory command differs, depending on whether the command is sent via an RS-232 or Telnet
connection or sent via a Web browser connection.
View file directory
RS-232 port and Telnet
View file directory
Web browser
Erase user-supplied Web page/files
Brightness
Set a specific brightness value
Increment brightness value
Decrement brightness value
View the brightness value
Contrast
Set a specific contrast value
Increment contrast value
Decrement contrast value
View the contrast value
Detail
Set a specific detail value
Increment detail value
Decrement detail value
View the detail value
X!
= TP (scaled) and insertion output number
NOTE:
X$
= Input number
X3!
= Voltage
X3@
= Internal temperature
X3# = Picture adjustments
SIS Command Response
(Host to Unit) (Unit to Host)
S
Sts00*
Temperature Celsius Future data field
• •
S
Temperature is 54.0 °C
12.250•54.000•750000•750000
Power supply at 12.25V
E } See below:
DF
filename1•date/time•length
filename2•date/time•length
filenamen•date/time•length
# of•Bytes•Left
E } See below:
DF
Var
File
File
File
File
E }
filenameEF Del•filename
Scaler Commands
EX$ X3# }
* BRIT Brit
EX$ }
+BRIT Brit
EX$ }
–BRIT Brit
EX$ } X3#]
BRIT
EX$ X3# }
* CONT Cont
EX$ }
+CONT Cont
EX$ }
–CONT Cont
EX$ } X3#]
CONT
EX! X3# }
* HDET Hdet
EX! }
+HDET Hdet
EX! }
–HDET Hdet
EX! } X3#]
HDET
X! definition
See
– the highest numbered input for your model
01
Positive or negative voltage and magnitude
Degrees Celsius
000 through 127 (064 = default)
DTP CrossPoint 4K Series Matrix Switchers • Programming Guide
Additional description
X3! X3@ ]
• •750000•750000
]
Future data field
•
Future data fields
List user-supplied files.
]
]
• •
• •
]
]]
List user-supplied files.
• file • = • new • array • ();
• • •
[1] = 'filename1,date1,filesize1';
• • •
[2] = 'filename3,date3,filesize3';
• •
• •
• • •
[n] = 'filenamen,daten,filesizen';
• • • • •
[n+1] = # of Bytes Left
]
X$ X3#] Specify the brightness adjustment.
*
X$ X3#] Increase the brightness setting by one.
*
X$ X3#] Decrease the brightness setting by one.
*
Show the brightness setting.
X$ X3#] Specify the contrast adjustment.
*
X$ X3#] Increase the contrast setting by one.
*
X$ X3#] Decrease the contrast setting by one.
*
Show the contrast setting.
X! X3#] Specify the detail adjustment.
*
X! X3#] Increase the detail setting by one.
*
X! X3#] Decrease the detail setting by one.
*
Show the detail setting.
on page 69 for numbers by matrix size.
77