If Processing The Work Clamps And The Feed Plate To A Shape That Matches The Sewing Pattern - Brother BAS-311H Instruction Manual

10. STANDARD ADJUSTMENTS
10-17. If processing the work clamps and the feed plate to a shape that
matches the sewing pattern
Process the work clamps and feed plate which match the sewing pattern, while referring to the processing diagram below.
* Values in ( ) are the recommended sizes when sewing using the maximum area (150x100 mm).
<Work clamp processing diagram>
Motor-driven work clamp specifications
Center of sewing area
<Feed plate processing diagram>
Recommended thickness 1.5 mm
Center of sewing area
67
[mm]
[mm]
BAS-311H
Pneumatic work clamp specifications
The left and right work clamps are symmetrical.
Center of sewing area
[mm]
3159B