Resetting All Settings To Their Defaults - Brother BAS-311H Instruction Manual

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

6-5. Resetting all settings to their defaults

If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the memory
data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by following the
steps given below to initialize the memory setting data.
Change to initialization mode.
1
(While pressing the RESET key, press the power ON
switch.)
2
3
47
[Reference]
If the or key (1) is pressed at this time, you can select the items to be initialized
as shown below.
* For details on initialization items other than "ALL", contact the place of purchase.
PROGRAM
No. display
1
2
3
4
* To clear individual programs, press the
program number.
Press the ENTER key for two seconds or more.
• The menu display will change to illuminated and initialization will then be
complete.
Press the TEST key.
BAS-311H
'1' will be displayed in the PROGRAM No. display, and 'ALL' will
be displayed in the menu display.
Main display
All data in memory is cleared or initialized.
「ALL」
「MEM」 Memory switch settings are initialized.
All sewing programs or individual programs
「SEW」
are cleared.
User program sewing conditions are
「USE」 initialized.
Cycle programs are initialized.
Initialization item
or key to select the
3108B 2382B 2383B
3107B
2414B
2404B