Brother BAS-311H Instruction Manual page 38

5. USING THE OPERATION PANEL (BASIC OPERATIONS)
(12) SPLIT No. indicator
Illuminates when the SELECT key (14) is pressed to show the split setting when split data (for specifying a pause while the
program is running) exists.
(13) WIPER indicator
Illuminates when the SELECT key (14) is pressed to switch to the thread wiper.
(14) SELECT key
Used to select the desired menu (horizontal and vertical scale, sewing speed, counter, (split No.), thread wiping).
(15) PROGRAM No. display
Shows information such as program numbers.
(16) Menu display
Displays information such as menu setting values, memory switch settings and error codes.
(17) Setting keys
Used to change the value which is displayed in the PROGRAM No. display (15).
(18) Setting keys
Used to change the value which is displayed in the menu display (16).
(19) TENSION key
Not used.
(20) TENSION indicator
Not used.
(21) SECTION No. display
Not used.
(22) TENSION display
Shows the program number when copying programs and using SD cards.
(23) Setting keys [+, -]
Not used.
(24) Setting keys [
Not used.
(25) ENTER key
Used to accept the values which are displayed in places such as the menu display (16).
(26) Function keys [F1, F2, F3, F4]
Used to directly select program numbers and cycle program numbers.
29
]
BAS-311H