Table of Contents
Advertisement
Commissioning
4.1
Tools to commission the converter
Operator panel
An operator panel is used to commission, troubleshoot and control the inverter, as well as to
back up and transfer the inverter settings.
The Intelligent Operator Panel (IOP) is available for snapping on to the Control Unit or as
handheld with a connection cable to the Control Unit. The graphics-capable plain text display
of the IOP enables intuitive operation and diagnostics of the inverter.
The IOP is available in two versions:
● With European languages
● With Chinese, English and German
Additional information about the compatibility of the IOP and Control Units is available in the
Internet:
Compatibility of the IOP and Control Units
(http://support.automation.siemens.com/WW/view/en/67273266)
The BOP-2 is an operator panel for snapping on to the Control Unit. The BOP-2 has a two-
line display for operation and diagnostics of the inverter.
Operating Instructions of the BOP-2 and IOP operator panels:
STARTER and Startdrive PC tools
STARTER and Startdrive are PC tools that are used to commission, troubleshoot and control
the inverter, as well as to back up and transfer the inverter settings. You can connect the PC
with the inverter via USB or via the PROFIBUS / PROFINET fieldbus.
Connecting cable (3 m) between PC and inverter: Article number 6SL3255-0AA00-2CA0
DVD article number
STARTER: 6SL3072-0AA00-0AG0
Startdrive: 6SL3072-4CA02-1XG0
System requirements and download:
STARTER (http://support.automation.siemens.com/WW/view/en/26233208)
Startdrive (http://support.automation.siemens.com/WW/view/en/68034568)
Help regarding operation:
STARTER videos
inverter/sinamics-g120/videos/Pages/videos.aspx)
Startdrive tutorial (http://support.automation.siemens.com/WW/view/en/73598459)
CU230P-2 Control Units
Compact Operating Instructions, 01/2016, A5E37058917B AA
Overview of the manuals (Page 49)
(http://www.automation.siemens.com/mcms/mc-drives/en/low-voltage-
4
33
Advertisement
Table of Contents
