IDEAL Viceroy GT 8 Installation And Servicing page 23

31 INSTALLING THE CONTROL PANEL - FD167 Standard
1. Route the sensors through the left or right hand opening
in the front top panel.
2. Route the burner leads through the other opening in the
front top panel.
3. Lower the control panel onto the location buttons nearer
the front and slide the control panel forwards.
32 INSTALLING THE CONTROL PANEL - FD168 Deluxe
1. Route the sensors through the left or right hand opening
in the front top panel.
2. Route the burner leads through the other openings in the
front top panel.
3. Lower the control panel onto the location buttons farther
away from the front and slide the control panel forwards.
6
Viceroy GT -
Installation & Servicing
INSTALLATION
5
vic7106
5
Front
3
4. Remove the three screws from the rear of the
control panel and remove the top/rear cover.
5. Secure the control panel to the casing top front
panel with two self tapping screws and shakeproof
washers provided.
6. Pull the mains cable and any other sensors into the
control panel through the appropriate opening
ready to make the connections.
REAR
3
4
4. Remove the two screws from the sides of the control
panel.
5. Tilt the control panel back.
6. Secure the control panel to the casing top front panel
with two self tapping screws and shakeproof washers.
7. Pull the mains cable and any other sensors into the
control panel through the appropriate opening ready to
make the connections.
Rear
4
vic7105
FRONT
23