IDEAL Viceroy GT 8 Installation And Servicing page 26

38 ASSEMBLING THE FRONT PANELS
1. Hook the left and right lower front panels on the side
panel buttons.
2. Hook the front casing support (two slots) into the side
panel slots.
39 NAMEPLATE
1. Affix the identification plate and CE
label (supplied in the instructions
bag) on the casing (on the left or right-
hand side) in an easily accessible
location.
40 CONTROL PANEL (General)
Refer to Frames 52 or 54 for specific details of Standard or
Deluxe panels.
Electrical control panel, equipped with temperature control.
The control panel carton contains:
1 control panel complete with burner connection harness.
The control panel incorporates a boiler thermostat controller, a
thermometer and a safety thermostat.
26
INSTALLATION
3. Position the upper front cover lower edge behind the front
vis7113
Boiler
XX - XX
Date of manufacture
Unit serial no.
The boiler thermostats - one controls the maximum boiler
operating temperature. The other controls the high/low
operation if a two stage burner is fitted.
The safety thermostat (with manual reset) - if the boiler
temperature rises abnormally (110º), the safety thermostat cuts
off the burner electricity power supply.
WARNING. In this case, you must call your installer.
casing support and hook it over the front top cover.
Year
(1)
Week
vic7083
Viceroy GT -
3
2
Installation & Servicing