IDEAL Viceroy GT 8 Installation And Servicing page 25

35 ASSEMBLING THE REAR PANELS
1. Hook the lower rear panel onto the side panel
buttons and secure onto the side panels using
two self tapping screws and lockwashers.
2. Hook the middle rear panel onto the side
panel buttons and secure onto the side panels
using two self tapping screws and lock
washers.
3. Hook the left and right upper rear panels onto
the side panel buttons and secure onto the
middle rear panel using one self tapping
screw and lock washer and onto the rear top
cover using two self tapping screws and lock
washers.
36 ASSEMBLING THE CASING TOP PANEL
1. Fix the top covers from front to rear in the order given in the table below.
2. Fix the first intermediate top cover (length 480) onto the wiring duct using
four M5x12 bolts and lock washers.
3. Fix the remaining top covers onto the wiring duct using two M5x12 bolts
and lock washers.
Boiler Front Top
Panel
Viceroy GT 8 480(IE10)
Viceroy GT 9 480(IE10)
Viceroy GT 10 480(IE10)
Viceroy GT 11 480(IE10)
Viceroy GT 12 480(IE10)
Viceroy GT 13 480(IE10)
Viceroy GT 14 480(IE10)
37 ASSEMBLING THE LOWER FRONT PANELS
1. Fit the lower front panel onto the
crosspiece (two self tapping
screws and lock washers.)
2. Fit the lower crosspiece assembly
by securing onto the side panels
using two self tapping screws and
lock washers.
3. Fit the burner upper front panel
onto the burner door and secure
using two M12x25 bolts and
washers.
Viceroy GT -
Installation & Servicing
INSTALLATION
Intermediate Rear
Top Panel Top Panel
480 490
480 480 170 IE13+IE14
480 480 330 IE11+IE13
480 480 490 IE12+IE13
480 480 480 170 IE14+IE13
480 480 480 330 IE11+IE13
480 480 480 490 IE12+IE13
vic7112
view from rear
vic7110
Pack
IE12
4
3
2
25