Port Forwarding - Digital Watchdog DWC-PB6M4T User Manual

Network Setup -

Port Forwarding

After entering the correct TCP/IP settings, you
are ready for 'Port Forwarding'(Cases A, B).
1. Please record the TCP/IP settings of your IP Camera for future
reference. You may need this information to access your IP
IP Camera TCP/IP Settings
IP Address
Subnet Mask
Default Gateway
Preferred DNS Server
DDNS Server
Web Port
2. After clicking 'Apply' , the system will prompt for a reboot.
Please allow the system 50 seconds to reboot and accept the
changes. After 50 seconds, close the con
The view will display 'Trying to Reconnect' . If the ACTIVE light
, the IP Camera has rebooted. After the system
reboots completely, remove the power supply from the
unit and close Internet Explorer.
3. Return your PC/Laptop TCP/IP properties to their original
settings.
4. Before installing the IP Camera, you must use 'Port
Forwarding' on your personal router (Cases A, B).
You will need to forward 1 ports:
Web Port
All the ports will be forwarded to the IP address you
assigned to the IP Camera.
In the example above, you would forward:
For information on how to use 'Port Forwarding' , please read
Appendix C.
ration screen.