Digital Watchdog DWC-PB6M4T User Manual page 10

Installation -
Cabling
1
Power Connection
Please, check the voltage and current capacity of rated power
carefully.
Rate Current
Power Consumption
DC 12V
2
Network Connection
Connect the crossover cable into the RJ-45.
White : DIN+
Yellow : DIN-
Black : DOUT-
Red : DOUT+
5
Alarm Output
It connects to the alarm lights, siren or
lamps, and it is activated according to
the Setup menu setting.
Cable of the relay output device should
connect to red and black line of the
Alarm Cable.
2
Network
1
Power
PoE
IEEE 802.3af
18W
Class 4
5
Alarm Output
Alarm Output
5
IR SUNSHIELD
4
Audio Input
3
Audio Output
3
Audio Output
Connect the 'Audio Out' cable of the camera to device like
speaker.
4 Audio Input
Connect the 'Audio In' cable of the camera to the device like
microphone.
6
Alarm Input
6
Alarm Input/Sensor
Cable of the sensor/alarm input device
should connect to white and yellow
line of the Alarm Cable.
Alarm Input
6