Digital Watchdog DWC-PB6M4T User Manual page 15

Network Setup -
Setup Case A, B
Case A:
Dynamic IP +
Personal Router [Most SOHO]
Phone Line
Cable/xDSL Modem
or CATV
(ISP Provided)
Internet
Case B:
Static(Fixed) IP +
Public Line
Gateway or Router
at ISP
Internet
as follows :
1. Network Type :
Camera
2. Internet Address :
PC
You need to assign an IP address to the IP Camera just as you do
Personal Router
W/Intergrated Switch with PC.
The IP address you assign must be unique to your network and
match your network as well. For information on how to choose
a unique IP and match your network, read the FAQ.
The IP address you assign must be a private IP. For information
on how to choose a private IP please, read the FAQ.
3. Subnet Mask :
You must use the same subnet mask as the one you noted under
'Current TCP/IP Settings' .
Camera 4. Default Gateway :
This IP address must be the IP address of your router.
(private or LAN side)
PC
Use the same Default Gateway you noted under 'Current TCP/IP
Personal Router
W/Intergrated Switch
Settings' .
5. Preferred DNS Server :
If you did not receive any IP addresses from your ISP, contact
the ISP and acquire the IP address of their DNS server.
6. DDNS Server :
This is the same site you will register later to accommodate
dynamic IP from your ISP.
7. Web Port :
Do not use the default port 80 as this number must be changed.
You may select any number between 1025 ~ 60000.
STATIC (even though you have Dynamic IP from
your ISP, use STATIC on the IP Camera)
A private IP address such as
192.168.0.200 (Example)
255.255.255.0 (Example)
192.168.0.1 (Example)
Use the 1st DNS Server from 'Assigned IP
Address from My ISP' .
Use the DDNS server.
8888