Drobo 5N2 User Manual page 83

1.4.1.2.2 Manually Updating Firmware from Drobo Website
To manually update the firmware from the website, follow steps.
1. Go to Start Drobo 5N2 page on our website and download the appropriate firmware file for your
Drobo product (a zip file for the PC or a dmg file for the Mac), saving it to a folder that is not located
on your Drobo device. If there is only one firmware file (a zip file), this file functions for both the Mac
and Windows-based computers.
2. Please ensure that you have read and write privileges to this folder.
3. Launch the Drobo Dashboard and select the appropriate Drobo device from the All Drobos
page. Also, if applicable, log in to this Drobo device.
4. Click the Tools option on the Navigation menu for the selected Drobo device to open the Tools
page.
5. In the Software Updates area, click the Manual Update option.
6. A warning message opens, asking you to complete or stop any data transfers.
7. Ensure that the Drobo device is not actively transferring data (blinking yellow and green) and
then, click the OK button. A dialog box opens, asking you to locate the zip file on your computer.
8. After locating the file, click the Open or OK button. Drobo installs the firmware.
9. When finished, a message opens, asking you to reboot your Drobo device to complete the
installation. Click the Yes button.
10. Drobo shuts down and restarts after the new firmware is installed.
Related topic:
Keeping Your Software Up to Date
Drobo5N2 User Guide 83