Disabling Drobodr At The Target - Drobo 5N2 User Manual

1.9.2.9 Disabling DroboDR at the Target

To disable DroboDR, you disable the source and the target (or destination). Disabling the target
enables you to use that Drobo device as you would any other Drobo device. The administrator
account, user accounts, share permissions and data that were synchronized from the source Drobo
device before disabling will now be active and available to you.
Note:
You need to be logged in as the administrator on the appropriate Drobo device to
perform this action.
1. In Drobo Dashboard, on the All Drobos page, select the Drobo device that is designated as
the target.
2. Click the DroboDR option on the Navigation menu. The DroboDR page opens.
3. Click the Setup DroboDR button. The Setup DroboDR dialog page opens.
4. At the top, click the Disabled option.
A message displays, letting you know that the administrator account, user accounts and
share permissions will be updated to match the source Drobo device, and that you will be
logged out and need to log in with the administrator account username and password, as
Drobo5N2 User Guide 199