Drobo 5N2 User Manual page 46

below:
1. Safely shut down the Drobo5N or DroboFS and Drobo 5N2.
For steps, see Safely Shutting Down Your Drobo 5N2
2. Remove ALL drives from the Drobo5N (16TB volume), Drobo5N (64TB volume) or DroboFS (16TB
volume) and insert ALL drives into the Drobo 5N2.
3. Turn the Drobo 5N2 back on by pressing its Power Toggle button. The Drobo 5N2 may take a
few minutes to boot up. When finished, all the data and shares will be available on the Drobo 5N2 as
it was on the other Drobo device.
Note:
You can also follow these steps to migrate a disk pack from one Drobo 5N2 to another
Drobo 5N2.
Drobo5N2 User Guide 46