Drobo 5N2 User Manual page 202

6. Enter a password and confirm the password by re-typing it in the appropriate text boxes.
Note:
The password you enter must match the one you enter for the source.
7. Click the OK button.
This Drobo device is now configured as the destination, or target, for data replication, and
you are returned to the DroboDR page. Note that the DroboDR mode now reads, "Sync as
Target" at the top of the screen, and the Start DroboDR Now button is disabled. It is
disabled because you can only manage synchronization from the source Drobo device.
Note:
When a Drobo device is configured as the destination, or target, you are not able to set up
or access shares on that system, as share settings will be disabled. After you synchronize data
from a source Drobo device, the destination system will display the shares that exist on the
source, but only as read-only. Shares will display as follows with "RO" as "Read-Only."
Related topics:
Configuring the Source Drobo Device
Using DroboDR to Replicate Data
Drobo5N2 User Guide 202