Drobo 5N2 User Manual page 37

2. Plug the other end into your router or switch.
3. Connect the power cord to the power connection at the back of your Drobo device.
4. Connect the other end of the power cord to a power source.
To power on your Drobo 5N2:
1. Once you attach one end of the power cord to your Drobo 5N2 and the other end of the cord to
a power source. turn on the Drobo using the power switch located on the back of the device.
2. With Drobo Dashboard running on your host computer, press the Power Toggle button on the
back of your Drobo device once.
3. Drobo will take several minutes to complete the power on cycle.
4. When the power on cycle is complete the Drobo will flash blue and yellow lights.
Drobo5N2 User Guide 37