Editing An Edid; Creating An Edid - Easy Edid Creator - Lightware DA2DVI-DL User Manual


  
5. Software Control – Lightware Device Controller
5.4.3. Editing an EDID
Select an EDID from Source panel and press Edit button to display Advanced EDID Editor window. The editor
can read and write all descriptors, which are defined in the standards, including the additional CEA extensions.
Any EDID from the device's memory or a saved EDID file can be loaded into the editor. The software resolves
the raw EDID and displays it as readable information to the user. All descriptors can be edited, and saved in
an EDID file, or uploaded to the User memory. For more details about EDID Editor please visit our website
(www.lightware.eu) and download EDID Editor user's manual.
EDID Editor window
DA2DVI-DL – User's Manual
5.4.4. Creating an EDID - Easy EDID Creator
Since above mentioned Advanced EDID Editor needs more complex knowledge about EDID, Lightware
introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID Creator it is possible to
create custom EDIDs in four simple steps. By clicking on the Create button below Source panel, Easy EDID
Creator is opened in a new window. For more details about EDID Editor please visit our website
(www.lightware.eu) and download EDID Editor user's manual.
Easy EDID Creator window
16