Management Port Leds In Ex4500 Switches; Figure 15: Leds On The Management Port On An Ex4500 Switch; Table 11: Link/Activity Led On The Management Port On An Ex4500 Switch; Table 12: Status Led On The Management Port On An Ex4500 Switch - Juniper EX4500 Hardware Manual

Management Port LEDs in EX4500 Switches

Table 11: Link/Activity LED on the Management Port on an EX4500 Switch

LED
Link/Activity

Table 12: Status LED on the Management Port on an EX4500 Switch

LED
Status
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Understanding Alarm Types and Severity Levels on EX Series Switches on page 235
The management port on the front panel of an EX4500 switch has two LEDs that indicate
link/activity and port status (see

Figure 15: LEDs on the Management Port on an EX4500 Switch

CON
34 36 38
35 37 39
MGMT
Link/Activity
LED
Table 11 on page 31 describes the Link/Activity LED.
Color
Green
Table 12 on page 31 describes the Status LED.
Color
Green
Front Panel of an EX4500 Switch on page 17
Connecting a Device to a Network for Out-of-Band Management on page 149
Chapter 2: Chassis Components and Descriptions
Figure 15 on page 31).
Management
port
MGMT
Status
LED
State and Description
Blinking—The port and the link are active, and there is link
activity.
On steadily—The port and the link are active, but there is no
link activity.
Off—The port is not active.
State and Description
Indicates the speed. The speed indicators are:
One blink per second—10 Mbps
Two blinks per second—100 Mbps
Three blinks per second—1000 Mbps
31