Honeywell HDZ302D User Manual page 8

8 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
List of Symbols
The following table contains a list of symbols that may appear on the camera:
Symbol
www.honeywell.com/security
Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to discard this product,
it must be sent to separate collection facilities for recovery and recycling. By
separating this product from other household-type waste, the volume of waste
sent to incinerators or landfills will be reduced, and thus natural resources will
be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is listed by UL
(formerly Underwriters Laboratories).
The FCC compliance logo.
This logo indicates that the product conforms to Federal Communications
Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the product is direct
current.
The alternating current symbol.
This symbol indicates that the power input/output for the product is
alternating current.
The RCM compliance logo.
This logo indicates that the product conforms with Australian RCM guidelines.
The CE compliance logo.
This logo indicates that the product conforms to the relevant
guidelines/standards for the European Union harmonization legislation.
The caution symbol.
This symbol indicates important information.
The protective earth (ground) symbol.
This symbol indicates that the marked terminal is intended for connection to
the protective earth/grounding conductor.