Working In The Live Interface - Honeywell HDZ302D User Manual

22 | equIP® Series 30x Zoom WDR PTZ Camera User Guide

Working in the Live Interface

The toolbar in the upper left corner of the screen, immediately above the video window,
provides quick access to commonly used controls
www.honeywell.com/security
Figure 2-3 Quick Access Toolbar
Table 2-2 Quick Access Controls
Talk Click to enable or disable bidirectional talk (audio must also be
enabled).
Audio Click to enable or disable the audio input stream.
Manual Track Click it and then left click the mouse and drag the mouse in the
video window to select any zone, you can enable the speed dome
to track the object in the specified area.
Record Click to start or stop recording video. The icon appears red when
video is being recorded, gray when video is not being recorded.
The recorded video is saved to the location specified in Setup >
Storage Setup > Destination > Path > Live Record.
Triple Snapshot Click to take three snapshots in quick succession (1 per
second). The snapshots are saved to the location specified in
Setup > Storage Setup > Destination > Path > Live Snapshot.
Snapshot Click to take a snapshot of the current video. The snapshot is
saved to the location specified in Setup > Storage Setup >
Destination > Path > Live Snapshot.
Digital Zoom When this function is enabled, you can drag over an area of the
video to enlarge that area. Right-click to return to the previous
magnification.
Alarm Output Click to generate or cancel an alarm output. The icon appears
red when the alarm is active, gray when the alarm is inactive.
Regional Focus Click to enable regional focus. Select an area of the video to
focus in on by dragging over the area with your mouse. The area
will come into sharper focus automatically.
Help Displays online help for the Live interface.
(Figure 2-3).