Access Control - TP-Link PHAROS SERIES User Manual

Blocked DoS Host List

Access Control

The function of Access Control is available only in AP router mode and AP client router (WISP Client)
mode.
The function can be used to control the Internet activities of hosts in the local area network. For example,
the online time limit and the specified web stations to visit can be controlled by the filtering policy.
Access Control
Filtering Policy
Click Blocked DoS Host List to display the blocked DoS host table including
host IP and host MAC. Click Refresh to renewal the table list. Click Clear to
release all the blocked hosts. If you want to release one or some of the blocked
hosts, please select them and Click Unlock.
Check the Enable box to use the access control function.
There are two filtering policies to control the Internet activities:
Allow the packets specified by any enabled access control policy to pass

through the Device.
The hosts listed below are allowed to access the Internet under the rules. While
others are forbidden to access.
Deny the packets specified by any enabled access control policy to pass

through the Device.
The hosts listed below are forbidden to access the Internet under the rules.
While others are allowed to access.
- 52 -
Chapter 5 Network Tab