TP-Link Touch P5 AC1900 User Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Router
  5. Touch P5 AC1900
  6. User manual

TP-Link Touch P5 AC1900 User Manual

Touch screen wi-fi gigabit router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Touch P5

User Guide

AC1900 Touch Screen Wi-Fi Gigabit
Router
REV1.0.0
1910011363

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Touch P5 AC1900 and is the answer not in the manual?

Questions and answers

Related Manuals for TP-Link Touch P5 AC1900

Summary of Contents for TP-Link Touch P5 AC1900

  • Page 1: User Guide

    Touch P5 User Guide AC1900 Touch Screen Wi-Fi Gigabit Router REV1.0.0 1910011363...

  • Page 2: Table Of Contents

    Contents Chapter 1. Get to Know about Touch P5 ......... . . 1 1.
  • Page 3 2. 25 FAQ..................... .59 Chapter 3.

  • Page 4: Chapter 1. Get To Know About Touch P5

    What This Product Does Touch P5 AC1900 Touch Screen Wi-Fi Gigabit Router integrates four Gigabit Ethernet ports, Firewall, NAT-router and Wireless AP. Powered by 3x3 MIMO technology, this router delivers exceptional range and speed, which can fully meet the need of Small Office/Home Office (SOHO) networks and the users demanding higher networking performance.

  • Page 5: Main Features

    1. 2. Main Features • Extra-large 4.3 inch capacitive colorful touchscreen surfaced with unbreakable toughened glass • Complies with IEEE 802.11a/b/g/n/ac, IEEE 802.3/3u, IEEE 802.3ab • 1*10/100/1000Mbps shielded Internet Port, 4*10/100/1000Mbps shielded Ethernet Ports, supports Auto-negotiation and Auto MDI/MDIX • Simultaneous Dual Band, with maximum speed up to 600Mbps over 2.4GHz and 1300Mbps over 5GHz •...

  • Page 6: Panel Layout

    1. 3. Panel Layout 1. 3. 1. The Front Panel Home Screen (Router Mode) Wireless Status 2.4GHz On 5GHz On Tap here to change the wireless settings. Total Clients Tap here to view clients’ information and block unauthorized clients. Guest Network Tap here to enable guest network and change the settings.

  • Page 7: The Back Panel

    Menu Screen Tap the icons to perform various functions of your Touch P5, such as Quick Setup, Mode Selection, Parental Controls, etc. 1. 3. 2. The Back Panel Your Touch P5’s back panel shows the connection ports, buttons and antennas. Refer to the following for detailed instructions. Item Description Power...

  • Page 8: Requirements For Operation

    1. 4. Requirements for Operation To connect and use your Touch P5 for Internet sharing, you must have the following: • Broadband Internet Access Service (DSL/Cable/Ethernet). • One DSL/Cable Modem that has an RJ45 connector (which is not necessary if your Touch P5 is connected directly to the Ethernet).

  • Page 9: Chapter 2. Configure Touch P5 As A Router

    Configure Touch P5 as a Router This chapter introduces how to connect and configure your Touch P5 in router mode which will provide Internet access for multiple wired and wireless devices simultaneously. Touch P5 supports two configuration methods: Web-based utility Touchscreen utility.

  • Page 10: Connect Your Touch P5

    2. 1 Connect Your Touch P5 Follow the steps below to connect your Touch P5. Install the antennas and position them vertically. Note: If your Internet connection is through an Ethernet cable from the wall, instead of a modem, connect the Ethernet cable directly to your Touch P5’s Internet port, and skip step 2,3,4.

  • Page 11: Log Into Your Touch P5

    2. 2 Log into Your Touch P5 You can log in and manage your Touch P5 through the touchscreen or web-based utility. Option 1: Through Touchscreen Utility (Recommended) Tap the home button or the screen and slide to start the screen. The first time you log in, you will need to set a new administrator password for your Touch P5.
  • Page 12 Note: Apps on the touchscreen will also need to use the new password that you have set to log in. Chapter 2 . Configure Touch P5 as a Router...
  • Page 13 2. 3 Quick Setup The Quick Setup app will guide you through the process to set up your Touch P5 to access the Internet. On the menu screen, tap the Quick Setup icon to open it. Set your Region and Time Zone and tap Next.

  • Page 14: Mode Selection

    2. 4 Mode Selection The Mode Selection app helps you easily switch your Touch P5 to a router, repeater or an access point. Router Mode (Default): Touch P5 can provides Internet access for multiple wired and wireless devices simultaneously. Repeater Mode: Touch P5 can extend your existing wireless coverage by repeating the wireless signal.

  • Page 15: Wireless Settings

    2. 5 Wireless Settings The Wireless Settings app helps you customize the wireless settings including the wireless radio, wireless network name, password and security option, etc., according to your needs. On the menu screen, tap the Wireless Settings icon to open it. Set your Region. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S.

  • Page 16: Advanced Wireless Settings

    Select the wireless network 2.4GHz or 5GHz and select Hide SSID, and your SSID will not broadcast. Your SSID won’t display when you scan for local wireless network list on your wireless device and you need to manually join the network. To change the security option: Select the wireless network 2.4GHz or 5GHz and choose your Security...
  • Page 17 Beacon Interval: Enter a value between 40 and 1000 in milliseconds to determine the duration between beacon packets that are broadcasted by your Touch P5 to synchronize the wireless network. The default is 100 milliseconds. Threshold: Enter a value between 1 and 2346 to determine the packet size of data transmission through your Touch P5. By default, the RTS (Request to Send) Threshold size is 2346.

  • Page 18: Wps

    2. 6 The WPS app helps you quickly establish a secure wireless connection between the WPS (Wi-Fi Protected Setup) supported devices and your Touch P5. Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can connect to your Touch P5 through this method. (WPS is not supported by IOS devices.) Note: The WPS function cannot be configured if the wireless function of your Touch P5 is disabled.
  • Page 19 Success will appear on the above screen, which means the client device has successfully connected to your Touch Connection failed will appear if the connection cannot be established within 2 minutes. Note: Option 2: Use the PIN Use this option if your client device asks for your Touch P5’s PIN. 1 ) Tap Connect to this router via PIN on the above screen of your Touch P5 to get the PIN, you can use the default one...

  • Page 20: Guest Network

    2. 7 Guest Network The Guest Network app allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can assign permissions for guest network users to ensure the security and privacy of your main network.
  • Page 21 To limit the guest network authorities: Allow guests to see each other: Select this checkbox to allow the clients in your guest network to access each other. Allow guests to access my local network: Select this checkbox to allow the clients in your guest network access your local network shares and printers, not just Internet access.

  • Page 22: Parental Controls

    The Parental Controls app allows you to block inappropriate, explicit and malicious websites; restrict access by certain times of day (for example, client devices can only visit www.tp-link.com during office hours); and at the same time it protects every device on your home network against malware and phishing through one central control point.
  • Page 23 1 ) Tap View to see devices connected to your Touch P5 at present and select your desired device(s). Or, enter the Device Name MAC Address manually if your desired device isn’t connected to your Touch P5 at present. 2 ) Enter the Description of the device.
  • Page 24 . Enter a web address keyword (e.g. wikipedia) in blacklist to block access to the websites containing that keyword. b . Enter a web address domain name (e.g. www.tp-link.com) allowed to access in whitelist. Specify the domain suffix (eg. .edu or .org) to allow access only to the websites with that suffix.

  • Page 25: Devices Control

    2. 9 Devices Control The Devices Control app helps to view the client information and block unauthorized users (wired or wireless) from connecting to your Touch P5. I want to: Block some specific client devices from connecting to my Touch P5. How can I 1.
  • Page 26 4. The blocked device(s) will be added to Devices in Blacklist automatically. Note: If you want to add a device manually or delete a blocked device, tap Edit on the Devices In Blacklist page to set up according to your needs. Done! Now devices in the blacklist cannot connect to your Touch P5.

  • Page 27: Printer Server

    Touch P5. Printers unlisted may be incompatible with your Touch P5. Install the TP-LINK USB Printer Controller Utility TP-LINK USB Printer Controller Utility helps you access the shared printer. Download and Install the utility on each computer that needs printer service.
  • Page 28 Access the Printer You should set the shared printer as Auto-Connect Printer on every computer that needs printer service. 1 ) Double-click the icon on your desktop to launch the USB Printer Controller. 2 ) Highlight the printer you share. Windows 3 ) Click the Auto-Connect for Printing...
  • Page 29 4 ) Select the printer you share, then click Apply. Windows Chapter 2 . Configure Touch P5 as a Router...
  • Page 30 Printer. Now you can print with this printer. Windows Note: The Print Server also allows different clients to share the scan feature of MFPs (Multi-Function Printers). To scan with TP-LINK USB Printer Controller, right-click the printer and select Network Scanner. Then, a scanning window will pop up.

  • Page 31: Ddns

    2. 11 DDNS Most ISPs (Internet service providers) assign a dynamic IP address to your Touch P5 and you can use this IP address to access your Touch P5 remotely. However, the IP address can change any time and you don’t know when it changes. In this case, you might need the DDNS (Dynamic Domain Name Server) feature on your Touch P5 to allow you and your friends to access your Touch P5 and local servers (FTP, HTTP, etc.) using domain name, in no need of checking and remembering the IP address.

  • Page 32: Lan

    2. 12 The LAN app helps to change the default LAN settings of your Touch P5. Touch P5 is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web-based management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on.

  • Page 33: Dhcp Server

    2. 13 DHCP Server The DHCP Server app can configure your Touch P5 to act as a DHCP (Dynamic Host Configuration Protocol) server to assign IP addresses to its clients and view client information from the client list. To use the DHCP server of your Touch P5, you must configure all computers on the LAN as “Obtain an IP Address automatically”.
  • Page 34 Address Lease Time is the amount of time in which a DHCP client can lease its current dynamic IP address assigned by your Touch P5. After the dynamic IP address expires, the client will be automatically assigned a new dynamic IP address. 5 ) The Default Gateway is automatically filled the same as the LAN IP address of your Touch P5.
  • Page 35 5 ) Check the Enable This Entry box and tap Save to make the settings effective (shown as figure below). Note: If you want to modify a reserved address, tap the reserved address to modify it. If you want to add or delete a reserved address, tap Edit to set up according to your needs.

  • Page 36: Qos

    2. 14 By default, the Internet bandwidth is shared by connected devices and applications, which means that the bandwidth of each device or application is uncontrollable while they are sharing the Internet. When some device is streaming video on Internet or downloading with P2P software, it will affect the Internet experience of other applications.
  • Page 37 4 ) Tap Save. Return to the home screen of QoS, and select High, Middle Low Priority the rules. Here we use High Priority an example. Select By Device to add the rule: View to choose the respective device, if the device is not listed, enter the Device Name MAC Address manually.
  • Page 38 The QoS rule will list in the priority table. Note: If you want to add or delete a QoS rule, tap Edit to set up according to your needs. Chapter 2 . Configure Touch P5 as a Router...

  • Page 39: Clock

    2. 15 Clock The Clock app displays the time while your Touch P5 is running. The system time you configure here will be used for other time-based functions like Parental Controls. On the menu screen, tap the Clock icon to open it. to configure the time settings.
  • Page 40 c . In the NTP Server II field, enter the IP address or domain name of the second NTP Server. (Optional) d . Tap Obtain to get the time and then tap Save. Manually: Select to set the date and time manually, then tap Save. To set up daylight saving time of your Touch P5: 1 ) Select Daylight Saving...
  • Page 41 To set up the display type of the clock: 1 ) Select Clock Display. 2 ) Select the clock type and tap Save. 3 ) To use your Touch P5 as a clock, you need to stay at the home page of Clock app.

  • Page 42: Screen Settings

    2. 16 Screen Settings The Screen Settings app helps to set the brightness and screen saver of your Touch P5. On the menu screen, tap the Screen Settings icon to open it. Drag the scroll bar to set the brightness of the screen. By default, the screen saver will start if the screen is idle for 3 minutes, you can change the wait time.

  • Page 43: Reboot & Reset

    2. 17 Reboot & Reset With Reboot & Reset app, you can restart your Touch P5 or reset it to its factory default settings. On the menu screen, tap the Reboot & Reset icon to open it. Reboot: Your Touch P5 will shut down and boot again. Reset: To reset your Touch P5 to its factory default settings and all the settings you have configured will be erased.

  • Page 44: Administrator Password

    2. 18 Administrator Password Administrator password is used to log in to the touchscreen page and web-management page of your Touch P5. You are required to set a new administrator password at your first login. You can also change it with the Administrator Password app. On the menu screen, tap the Administrator Password icon to open it.

  • Page 45: About

    2. 19 About The About app displays the product model, hardware and firmware information of your Touch P5. On the menu screen, tap the About icon to open it. Chapter 2 . Configure Touch P5 as a Router...

  • Page 46: Usb Application

    2. 20 USB Application This section describes how to share and access USB devices connected to your Touch P5 among different clients through web-based utility. Refer to Through Web-based Utility to log into your Touch P5. Touch P5 only supports USB external flash drives, hard drives and USB printers, and does not support USB 3G/4G modems. This chapter contains the following sections: •...
  • Page 47 3 ) Select the Volume Name Folder Path, then enter a Folder Name as you like. 4 ) Decide the way you share the folder: Allow Guest Network Access: Tick to allow the clients in your guest network to access the shared folder. Enable Authentication: Tick to enable authentication for this folder sharing, and you will be required to use a username and password to access the USB disk.

  • Page 48: Remote Access Via Ftp Server

    3 ) Choose to use the default Account (admin) or use a new account and click Save. 4 ) Enable Authentication to apply the account you just set. • If you leave Share All enabled, click the button to enable Authentication for all folders.
  • Page 49 • Get a safe backup for the materials for a presentation. • Remove the files on your camera’s memory card from time to time during the journey. Note: If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because private addresses are not routed on the Internet.
  • Page 50 4 ) Access Your USB Disk via Internet Now different clients with Internet connection can access the USB disk: • To download, open a web browser and type the server address ftp://<WAN IP address of your Touch P5>:<port number> (such as ftp://59.40.2.243:21) or ftp://<domain name of your Touch P5>:<port number>...

  • Page 51: Media Sharing

    4 ) Tick Enable Authentication. If you allow network clients to modify this folder, tick Enable Write Access. 5 ) Click OK. Note: Touch P5 can share eight volumes at most. You can click on the page to detach the corresponding volume you do not need to share.
  • Page 52 Customize Your Settings To Only Share Specific Content By default, Share All is enabled so all content on the USB disk is shared. If you want to only share specific folders, follow the steps below: 1 ) Visit http://tplinkwifi.net/, then log in with the username and password you set for your Touch P5. 2 ) Select Basic >...

  • Page 53: Ipv6 Connection

    2. 21 IPv6 Connection If your ISP provides IPv6 connection and has provided some detailed IPv6 parameters, you can configure your Touch P5 to permit IPv6 connection. Visit http://tplinkwifi.net/, and log in with the username and password you set for your Touch P5. Go to Advanced >...
  • Page 54 Click Status on the left to check whether you succeed or not. The following figure is an example of a successful PPPoE configuration. Chapter 2 . Configure Touch P5 as a Router...

  • Page 55: Iptv

    2. 22 IPTV If your ISP provides IPTV service and has provided some detailed IPTV parameters, you can configure your Touch P5 to permit IPTV connection. I want to: Configure IPTV setup to enable Internet /IPTV /Phone service provided by my Internet Service Provider (ISP).
  • Page 56 Your IPTV setup is done now! You may need other configurations on your set-top box before Done! enjoying your TV. Chapter 2 . Configure Touch P5 as a Router...

  • Page 57: Nat Forwarding

    2. 23 NAT Forwarding Touch P5’s NAT (Network Address Translation) feature makes the devices in the LAN use the same public IP address to communicate in the Internet, which protects the local network by hiding IP addresses of the devices. However, it also brings about the problem that external host cannot initiatively communicate with the specified device in the local network.

  • Page 58: Open Ports Dynamically By Port Triggering

    Note: 1. It is recommended to keep the default settings of Internal Port Protocol if you are not clear about which port and protocol to use. 2. If the service you want to use is not in the list of Service Type, you can enter the corresponding parameters manually.

  • Page 59: Make Applications Free From Port Restriction By Dmz

    Note: You can add multiple port triggering rules according to your network needs. If the application you want to use is not in the list of Existing Applications, you can enter the corresponding parameters manually. You should verify the ports number that the application needs. 2.

  • Page 60: Make Xbox Online Games Run Smoothly By Upnp

    The configuration is completed. You’ve set your computer to a DMZ host and now you can make a Done! team to game with other players. 2. 23. 4. Make Xbox Online Games Run Smoothly by UPnP UPnP (Universal Plug and Play) protocol allows the applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports.

  • Page 61: Firmware Upgrade

    TP-LINK is dedicated to improving and richening the product features, giving you a better network experience. We will release the latest firmware at TP-LINK official website, you can download the latest firmware file from our website and upgrade the firmware to the latest version.

  • Page 62: Faq

    2. 25 Q1 What can I do if I cannot access the Internet? Check if the Internet is working properly by connecting a computer directly to the modem via an Ethernet cable. If not, contact your Internet Service Provider. Quick Setup on the menu screen to run the setup again.
  • Page 63 4 ) Click settings, deselect the following three options and click OK; 5 ) Go to Advanced > Restore advanced settings, and click OK. Chapter 2 . Configure Touch P5 as a Router...
  • Page 64 . Exit the wireless configuration tool( the TP-LINK Utility, for example); c . Select and right click on...
  • Page 65 Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. g . Connect to wireless network. If you can find other wireless network except your own, please follow the steps below: 1 ) Make sure your computer/device is still in the range of your Touch P5/modem, move closer if it is currently too far away;...

  • Page 66: Chapter 3. Configure Touch P5 As A Repeater

    Configure Touch P5 as a Repeater This chapter introduces how to connect and configure your Touch P5 in repeater mode which will extend existing wireless coverage by repeating the wireless signal. We recommend that you use repeater mode when your home network connection is poor, or when you want a larger wireless coverage to eliminate “dead zones”.

  • Page 67: Quick Setup

    3. 1 Quick Setup You can log in and manage your Touch P5 through the touchscreen or web-based utility. Option 1: Through Touchscreen Utility (Recommended) The Quick Setup app on the touchscreen will guide you through the process to connect your Touch P5 to the front host network and set up its extended network.
  • Page 68 Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. are fixed to the U.S. region. Follow the on-screen instructions to complete the configuration. Once the configuration is completed, please follow the instructions below to relocate your Touch P5 at an ideal location.
  • Page 69 • No Interference - Choose a location away from Bluetooth devices and other household electronics, such as cordless phone, microwave, and baby monitor, etc., to minimize signal interference. Connect your wireless clients to the network of your Touch P5. Note: Your Touch P5 shares your host network’s Wi-Fi password for both 2.4GHz and 5GHz networks, but may have different wireless network name if you customize the names during the configuration.
  • Page 70 Re-login and select your region and click Next. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S. are fixed to the U.S. region. Follow the Quick Setup instructions to complete the configuration. Once the configuration is completed, please follow the instructions below to relocate your Touch P5 at an ideal location.
  • Page 71 Note: Your Touch P5 shares your host network’s Wi-Fi password for both 2.4GHz and 5GHz networks, but may have different wireless network name if you customize the names during the configuration. Please connect your wireless devices to the extended network of your Touch P5. Chapter 3 .

  • Page 72: Entertainment Adapter

    3. 2 Entertainment Adapter Your Touch P5 can be used as a wireless network adapter to help any Ethernet-only device (such as a Blu-ray player, game console, DVR, or smart TV) to connect to the host network. After your Touch P5 is connected to the host router, you can connect an Ethernet-enabled device to your Touch P5’s Ethernet port via an Ethernet cable, then these devices can connect to the wireless network of the host router.

  • Page 73: Mode Selection

    3. 3 Mode Selection The Mode Selection app helps you easily switch your Touch P5 to a router, repeater or an access point. Router Mode (Default): Touch P5 can provides Internet access for multiple wired and wireless devices simultaneously. Repeater Mode: Touch P5 can extend your existing wireless coverage by repeating the wireless signal.

  • Page 74: Wireless Settings

    3. 4 Wireless Settings The Wireless Settings app helps you configure the wireless settings of your host network and extended network according to your needs. On the menu screen, tap the Wireless Settings icon to open it. Set your Region. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S.
  • Page 75 2 ) Select the Connect To Host Network checkbox. 3 ) Tap Host SSID to scan for the host network you want to extend. 4 ) Select the SSID of your host network from the list. Note: If the host network you want to extend is on but not shown in the list, please try to move your Touch P5 closer to your host router, then tap Rescan.
  • Page 76 Enable Extended Network: Enable or disable the 2.4GHz/5GHz extended network. Extended SSID: Either tap Copy Host SSID to copy the host router’s SSID or create a new name using up to 32 characters. This field is case-sensitive. Hide SSID: Select this checkbox if you want to hide your Touch P5’s SSID from the Wi-Fi network list, and your wireless device will need to manually join the network.

  • Page 77: Devices Control

    3. 5 Devices Control The Devices Control app helps to view the client information and block unauthorized users (wired or wireless) from connecting to your Touch P5. I want to: Block some specific client devices from connecting to my Touch P5. How can I 1.
  • Page 78 4. The blocked device(s) will be added to Devices in Blacklist automatically. Note: If you want to add a device manually or delete a blocked device, tap Edit on the Devices In Blacklist page to set up according to your needs. Done! Now devices in the blacklist cannot connect to your Touch P5.

  • Page 79: Lan

    3. 6 By default, your Touch P5 is set to obtain an IP address automatically from the host router. The LAN app allows you to use a specific IP address appropriate to your network demand. Note: We do recommend you change the IP address unless you are quite sure about the IP setting for special network demand.

  • Page 80: Dhcp Server

    3. 7 DHCP Server The DHCP Server app can configure your Touch P5 to act as a DHCP (Dynamic Host Configuration Protocol) server to assign IP addresses to its clients and view client information from the client list. To use the DHCP server function of your Touch P5, you must configure all computers on the LAN as “Obtain an IP Address automatically”.
  • Page 81 • IP Address Pool: The start address and end address must be on the same subnet with LAN IP. Your Touch P5 will assign addresses within this specified range to its clients. It is from 192.168.0.100 to 192.168.0.199 by default. •...
  • Page 82 2 ) Enter the MAC Address of the device for which you want to reserve IP address. 3 ) Specify the IP Address which will be reserved for the device. 4 ) Enter the Description for the device. 5 ) Check the Enable This Entry box and tap Save...

  • Page 83: Screen Settings

    3. 8 Screen Settings The Screen Settings app helps to set the brightness and screen saver of your Touch P5. On the menu screen, tap the Screen Settings icon to open it. Drag the scroll bar to set the brightness of the screen. By default, the screen saver will start if the screen is idle for 3 minutes, you can change the wait time.

  • Page 84: Reboot & Reset

    3. 9 Reboot & Reset With Reboot & Reset app, you can restart your Touch P5 or reset it to its factory default settings. On the menu screen, tap the Reboot & Reset icon to open it. Reboot: Your Touch P5 will shut down and boot again. Reset: To reset your Touch P5 to its factory default settings and all the settings you have configured will be erased.

  • Page 85: Administrator Password

    3. 10 Administrator Password Administrator password is used to log in to the touchscreen page and web-management page of your Touch P5. You are required to set a new administrator password at your first login. You can also change it with the Administrator Password app. On the menu screen, tap the Administrator Password icon to open it.

  • Page 86: About

    3. 11 About The About app displays the product model, hardware and firmware information of your Touch P5. On the menu screen, tap the About icon to open it. Chapter 3 . Configure Touch P5 as a Repeater...

  • Page 87: Faq

    3. 12 Q1. What can I do if I forgot my wireless network password? The password of the extended network is the same as your host network. Q2. How do I restore my Touch P5 to its factory default settings? Reboot &...

  • Page 88: Chapter 4. Configure Touch P5 As An Access Point

    Configure Touch P5 as an Access Point This chapter introduces how to connect and configure your Touch P5 in access point mode which will transform your existing wired network to a wireless network. We recommend that you use access point mode when your wireless devices need to access to a wired network, or when you require a supplement of ports for your wired router.

  • Page 89: Connect Your Touch P5

    4. 1 Connect Your Touch P5 Follow the steps below to connect your Touch P5. Install the antennas and position them vertically. Connect the wired router’s LAN port to the Internet port on your Touch P5 via an Ethernet cable. Note: If your Internet connection is through an Ethernet cable from the wall, instead of a wired router, connect the Ethernet cable directly to your Touch P5’s Internet...

  • Page 90: Log Into Your Touch P5

    4. 2 Log into Your Touch P5 You can log in and manage your Touch P5 through the touchscreen or web-based utility. Option 1: Through Touchscreen Utility (Recommended) On the menu screen, tap the Mode Selection icon to open it. Select Access Point mode and tap Save.
  • Page 91 Chapter 4 . Configure Touch P5 as an Access Point...

  • Page 92: Quick Setup

    4. 3 Quick Setup The Quick Setup app on the touchscreen will guide you through the process to set the wireless network of your Touch P5. On the menu screen, tap the Quick Setup icon to open it. Set your Region and Time Zone and tap Next.

  • Page 93: Mode Selection

    4. 4 Mode Selection The Mode Selection app helps you easily switch your Touch P5 to a router, repeater or an access point. Router Mode (Default): Touch P5 can provides Internet access for multiple wired and wireless devices simultaneously. Repeater Mode: Touch P5 can extend your existing wireless coverage by repeating the wireless signal.

  • Page 94: Wireless Settings

    4. 5 Wireless Settings The Wireless Settings app helps you customize the wireless settings including the wireless radio, wireless network name, password and security option, etc., according to your needs. On the menu screen, tap the Wireless Settings icon to open it. Set your Region. Note: Per FCC regulations, all Wi-Fi products marketed in the U.S.
  • Page 95 Select the wireless network 2.4GHz or 5GHz and select Hide SSID, and your SSID will not broadcast. Your SSID won’t display when you scan for local wireless network list on your wireless device and you need to manually join the network. To change the security option: Select the wireless network 2.4GHz or 5GHz and choose your Security...

  • Page 96: Wps

    4. 6 The WPS app helps you quickly establish a secure wireless connection between the WPS (Wi-Fi Protected Setup) supported devices and your Touch P5. Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can connect to your Touch P5 through this method. (WPS is not supported by IOS devices.) Note: The WPS function cannot be configured if the wireless function of your Touch P5 is disabled.
  • Page 97 Success will appear on the above screen, which means the client device has successfully connected to your Touch Connection failed will appear if the connection cannot be established within 2 minutes. Note: Option 2: Use the PIN Use this option if your client device asks for your Touch P5’s PIN. 1 ) Tap Connect to this AP via PIN on the above screen of your Touch P5 to get the PIN, you can use the default one or...

  • Page 98: Devices Control

    4. 7 Devices Control The Devices Control app helps to view the client information and block unauthorized users (wired or wireless) from connecting to your Touch P5. I want to: Block some specific client devices from connecting to my Touch P5. How can I 1.
  • Page 99 4. The blocked device(s) will be added to Devices in Blacklist automatically. Note: If you want to add a device manually or delete a blocked device, tap Edit on the Devices In Blacklist page to set up according to your needs. Done! Now devices in the blacklist cannot connect to your Touch P5.

  • Page 100: Lan

    4. 8 By default, your Touch P5 is set to obtain an IP address automatically from the host network. The LAN app allows you to use a specific IP address appropriate to your network demand. Note: We do recommend you change the IP address unless you are quite sure about the IP setting for special network demand.

  • Page 101: Dhcp Server

    4. 9 DHCP Server The DHCP Server app can configure your Touch P5 to act as a DHCP (Dynamic Host Configuration Protocol) server to assign IP addresses to its clients and view client information from the client list. To use the DHCP server function of your Touch P5, you must configure all computers on the LAN as “Obtain an IP Address automatically”.
  • Page 102 • IP Address Pool: The start address and end address must be on the same subnet with LAN IP. Your Touch P5 will assign addresses within this specified range to its clients. It is from 192.168.0.100 to 192.168.0.199 by default. •...
  • Page 103 2 ) Enter the MAC Address of the device for which you want to reserve IP address. 3 ) Specify the IP Address which will be reserved for the device. 4 ) Enter the Description for the device. 5 ) Check the Enable This Entry box and tap Save...

  • Page 104: Screen Settings

    4. 10 Screen Settings The Screen Settings app helps to set the brightness and screen saver of your Touch P5. On the menu screen, tap the Screen Settings icon to open it. Drag the scroll bar to set the brightness of the screen. By default, the screen saver will start if the screen is idle for 3 minutes, you can change the wait time.

  • Page 105: Reboot & Reset

    4. 11 Reboot & Reset With Reboot & Reset app, you can restart your Touch P5 or reset it to its factory default settings. On the menu screen, tap the Reboot & Reset icon to open it. Reboot: Your Touch P5 will shut down and boot again. Reset: To reset your Touch P5 to its factory default settings and all the settings you have configured will be erased.

  • Page 106: Administrator Password

    4. 12 Administrator Password Administrator password is used to log in to the touchscreen page and web-management page of your Touch P5. You are required to set a new administrator password at your first login. You can also change it with the Administrator Password app. On the menu screen, tap the Administrator Password icon to open it.

  • Page 107: About

    4. 13 About The About app displays the product model, hardware and firmware information of your Touch P5. On the menu screen, tap the About icon to open it. Chapter 4 . Configure Touch P5 as an Access Point...

  • Page 108: Faq

    4. 14 Q1. What can I do if I cannot access the Internet? Check if the Internet is working properly by connecting a computer directly to the wired router via an Ethernet cable. If not, contact your Internet Service Provider. Quick Setup on the menu screen to run the setup again.

  • Page 109: Appendix A: Specifications

    Appendix A: Specifications General IEEE 802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a, IEEE 802.11e, IEEE 802.11i, IEEE 802.1X, IEEE Standards and Protocols 802.3X, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP 1 10/100/1000M Auto-Negotiation Internet RJ45 port; 4 10/100/1000M Auto-Negotiation Ethernet RJ45 ports supporting Auto MDI/MDIX;...

  • Page 110: Appendix B: Glossary

    Appendix B: Glossary • 802.11ac - IEEE 802.11ac is a wireless computer networking standard of 802.11.This specification will enable multi-station WLAN throughput of at least 1 gigabit per second .This is accomplished by extending the air interface concepts embraced by 802.11n: wider RF bandwidth, more MIMO spatial streams, multi-user MIMO, and high-density modulation (up to 256 QAM).
  • Page 111 No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2015 TP- LINK TECHNOLOGIES CO., LTD. All rights reserved.

  • Page 112: Ce Mark Warning

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 113: Canadian Compliance Statement

    Reason/remark Country Restriction None Only for indoor applications Russian Federation 5150-5250 MHz Reason/remark Country Restriction Bulgaria Not implemented Planned Croatia License required General authorization required if used outside own premises Italy None General authorization required for network and service supply (not for spectrum) Luxembourg No info Russian Federation...
  • Page 114 減少電磁波影響，請妥適使用。 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.

  • Page 115: Declaration Of Conformity

    TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AC1900 Touch Screen Wi-Fi Gigabit Router Model No.: Touch P5 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product...

Table of Contents