TP-Link PHAROS SERIES User Manual page 59

IP&MAC Binding Check the Enable box to use the IP&MAC binding function.
To use the IP&MAC Binding:
1. Click Add in the table of IP&MAC binding.
2. Enter the IP address and MAC address that you want to bind, for example
192.168.0.12, 00-23-5A-15-99-42. The new added entry is enabled by
default.
3. Click OK after finishing the configuration.
Select the added entries, you can edit or delete them. Click Import to import
all the entries in Monitor > ARP Table. The imported entries are disabled by
default. You can select the certain entry and click Edit to enable it.
- 56 -
Chapter 5 Network Tab