TP-Link PHAROS SERIES User Manual page 38

Client Name
MAC Address
IP Address
Lease Time
Auto Refresh
Dynamic WAN

NOTE:
This submenu is only available in AP router mode and AP client router (WISP Client) mode when the
WAN connection type is PPPoE, PPTP, L2TP or Dynamic.
Dynamic WAN displays the WAN connection status of your device.
Status
IP Address
Subnet Mask
Gateway IP
Primary DNS/Secondary DNS
Connection Uptime
Displays the device name of the client.
Displays the client's MAC Address.
Displays the IP address assigned to the client.
Displays the time of the DHCP client leased. Before the time is up, DHCP client
will request to renew the lease automatically.
If Auto Refresh is checked, parameters in the table will refresh automatically.
Displays the WAN status is disconnected or connected.
Displays the IP address of the WAN.
Displays the Subnet Mask of the WAN.
Displays the address of the gateway.
Displays the DNS IP address provided by your ISP.
Displays the time that the latest WAN connection lasts.
- 35 -
Chapter 4 Status Tab