Ssh Server - TP-Link PHAROS SERIES User Manual

Set Community
Set Source
NOTE:
Defining community can allow management systems in the same community to communicate with the
SNMP Agent. The community name can be seen as the shared password of the network hosts group. Thus,
for the safety, we suggest modifying the default community name before enabling the SNMP Agent
service. If the field of community is blank, the SNMP Agent will not respond to any community name.

SSH Server

The SSH Server function allows users to log in and manage the device through SSH connection on the SSH
client software.
SSH (Secure Shell) is a security protocol established on application and transport layers. SSH-encrypted-
connection is similar to a telnet connection, but essentially the old telnet remote management method is
not safe, because the password and data transmitted with plain-text can be easily intercepted. SSH can
provide information security and powerful authentication when you log in this device remotely through
an insecure network environment. It can encrypt all the transmission data and prevent the information in
remote management from being leaked.
Server Port
SSH Login
Remote Management
Set Community has the read and write right of the device's SNMP information.
Enter the community name that allows read/write access to the device's SNMP
information. The community name can be considered as a password to restrict
the access right of SNMP managers. The default name is private.
Defines the IP address (for example, 10.10.10.1) or subnet (for example,
10.10.10.0/24) for management systems that can serve as Set Community to
read and write the SNMP information of this device. The default is 0.0.0.0,
which means all hosts can read and write the SNMP information of this device.
Enter the TCP/IP port of the SSH Server. The default port is 22.
Enable the SSH Server function.
Enable the function to let TP-LINK Pharos Control software manage the device
remotely.
- 75 -
Chapter 7 Management Tab