TP-Link PHAROS SERIES User Manual page 16

3. The AP list will appear as shown below. Select the desired wireless network and click Connect. It's
possible that two or more networks use the same SSID in the AP list. Lock to AP can make the device
connect to the specified AP you had connected before the next time.
4. If the root AP needs password to be connected, you should select the same Mode, Channel Width
and Security type and enter the same PSK Password as entered on the root AP/router. Enter the
distance between this device and the root AP in Distance setting. Then click Next.
Chapter 3 Quick Setup Guide
- 13 -