Configuration - TP-Link PHAROS SERIES User Manual

NOTE:
1. Please select the proper software version that matches your hardware to upgrade.
2. To avoid damage, please do not power off the device while upgrading.
3. After upgrading, the device will reboot automatically.

Configuration

The controls in this section manage the device configuration routines and the option to reset the device to
factory default settings.
The device configuration is stored in the plain text file. You can back up, restore, or update the system
configuration file.
Backup Configuration
Upload Configuration
Reset to Factory Default
Reboot Device
NOTE:
1. After backing up, the device will reboot automatically.
2. To avoid damage, please don't turn off the device while uploading.
3. You are suggested to back up the configuration before upgrading.
Click Backup to back up the current system configuration file.
Click Browse to locate the new configuration file. Select the file and click Open,
then the new configuration to be uploaded is displayed in the field. Click
Upload to upload the new configuration to the device. We recommend that
you back up your current system configuration before uploading the new
configuration.
Resets the device to the default settings. This option will reboot the device,
and all factory default settings will be restored. It's recommended that you
back up your current system configuration before resetting the device to its
defaults.
Initiates a full reboot cycle of the device. The system configuration stays the
same after the reboot cycle completes. Any changes that have not been
applied will be lost.
- 82 -
Chapter 8 System Tab