A1.2 4 Parts In The Blade Kit; A1.3 2.1 Sight Glass Assembly; A1 Figure 3 - E2M18/28 Interim Oil Sight Glass Assembly; A2 Table 3 - E2M28 Blade Kit Items - Edwards E2M28 Instruction Manual

A373-01-840 Issue J
A1.2 4 Parts in the blade kit
Illustration Item
149
150
151
156
157
Figure A1 - Figure 3 - E2M18/28 Interim oil sight glass assembly
Description
E2M18/28 Oil box
Sight glass clamp
Sight glass
'O' ring
M4 x 16 SS Cap screws
A1.3 2.1 Sight glass assembly
Make sure that the machined surface is free from scratches. Check that the sight glass is a close fit in the clamp
recess. Put the sight-glass in the clamp recess, followed by the 'O' ring, you must not use any lubricant. Make sure
that the 'O' ring is located centrally in the recess.
Put the clamp assembly on to the oil box, make sure that the 'O' ring has not moved.
Insert the six screws, progressively tighten the screws starting with the two screws in the middle and tighten the
screws diagonally.
Page 18
Table A2 - Table 3 - E2M28 Blade Kit items
Descriptioin
HV blade
LV blade
Oil pump blade
Spring
Pin
Table A3 - Table 2 - E2M18/28 interim oil sight glass assembly
Edwards and the Edwards logo are trademarks of Edwards Limited.
Part No
A36301012
A36301016
A29201018
23724-072
218231290
© Edwards Limited 2007. All rights reserved.
Quantity
2
2
1
2
2
Qty
1
1
1
1
6