Installing The Radio; Using A Wham Microphone With The Radio - Uniden UM525 Owner's Manual

UM525 Paper OM.fm Page 17 Tuesday, January 4, 2005 2:54 PM
In severe cases of noise interference, it may be necessary to install a noise
suppression kit. Contact the dealer where you purchased the radio for more
information.

Installing the Radio

After you have carefully considered the various factors affecting your choice of
location, follow these steps to install the radio.
1. Position the radio (with the bracket, microphone, power cord, antenna and any
auxiliary cables installed) into the selected location to assure there is no
interference with the surrounding items.
2. Mark the location of the mounting bracket.
3. Remove the bracket from the radio and use it as a template to mark the holes to
be drilled for the mounting hardware.
4. Drill the holes and mount the bracket with hardware compatible with the material
of the mounting surface.
Note: Do not use mounting knobs other than the ones supplied. Do not insert the
knobs without attaching the bracket.
5. Connect all other auxiliary cables and accessories.
6. Install the radio in the mounting bracket and connect all cables and accessories
to the appropriate jacks and connectors.

Using a WHAM Microphone With the Radio

To connect a WHAM microphone to the radio, follow the steps listed in "Setting Up a
WHAM" on Page 40. Then refer to the owners manual provided with the WHAM
microphone for more information about connecting it to the radio.
Setting Up the Radio
17