Using 16/9 Tri; Using Memory Channel; Saving Channels In Memory; Scanning Memory Channels - Uniden UM525 Owner's Manual

UM525 Paper OM.fm Page 26 Tuesday, January 4, 2005 2:54 PM

Using 16/9 TRI

Press 16/9 TRI once to quickly tune the radio to Channel 16. Press 16/9 TRI again to
quickly tune the radio to Channel 9. Press 16/9 TRI a third time to quickly tune the
radio to the channel you tuned before you pressed 16/9 TRI.
Notes:
• Pressing 16/9 TRI cancels WX mode if the radio is set to WX mode.
• Pressing 16/9 TRI stops the radio from scanning if the radio is set to Scan mode.
• Pressing 16/9 TRI cancels Scan mode if the radio is set to EMG mode.
• The radio cancels EMG mode if you press WX, hold down Hi/Lo/SCAN, or rotate
PUSH/SELECT.

Using Memory Channel

Saving Channels in Memory

You can save channels you tune in USA, CAN, or INT mode into the radio's memory.
This makes it easy to quickly tune the channels again. To save a channel, tune the
channel then hold down SCAN/MEM for 2 seconds to save it. MEM appears. To delete
a channel from memory, tune the channel you want to delete then hold down SCAN/
MEM for 2 seconds. MEM disappears.
Notes:
• You cannot save a memory channel in WX mode.
• You must store more than one channel in the memory for memory channel scan to
work.

Scanning Memory Channels

You can scan channels you saved in the radio's memory. This lets you quickly access
and tune them. To scan memory channels, repeatedly press SCAN/MEM. Each
channel you saved appears each time you press SCAN/MEM.

Using Triple Watch

Triple Watch scans Channel 9 and Channel 16 every 2 seconds. If the radio detects a
transmission on Channel 9 or Channel 16 while set to Triple Watch, the channel
indicator blinks.
Hold down 16/9 TRI for about 2 seconds to turn Triple Watch on or off. If Triple Watch
is off, TRI appears and Triple Watch is turned on. If Triple Watch is on, TRI disappears
and Triple Watch is turned off.
26
Basic Operation