Using The Radio In Scan Mode; Scan Mode With Weather Alert Watch - Uniden Atlantis 275 Owner's Manual

Using the radio in scan mode

x To activate scan mode, press SCN DUAL.
x You must have at least two channels in memory to start
a scan.
x You cannot transmit while in scan mode.
x To save a channel into memory, select the channel,
then press the MEM SOS key. The MEM icon displays
whenever you tune to that channel.
x To remove a channel from memory, set the radio to that
channel, then press the MEM SOS key. The MEM icon
no longer displays.
x When the radio stays on a channel, press ▲ to leave that
channel and resume scanning.
x Pressing 16/9 TRI while in Scan mode pauses scanning
and immediately goes to emergency channel 16. Press
again to go to channel 9. Press a third time to resume
scanning.
x To end the scan, press the SCN DUAL key again; the
radio remains on the last scanned channel.
# Note: WX channels and Channel 70 cannot be saved in
memory.

Scan mode with Weather Alert Watch

If you activate Weather Alert Watch while in scan mode, the
radio checks the most recently-used weather channel every
seven seconds, then continues scanning the next channel in
memory:
08 10 11
Every few seconds, the radio
checks the last-used weather
channel, then scans the next
channel.
Uniden Atlantis 275 Radio Owner's Manual
Memory Channel Scan
12 13 14 15 17 20
WX Alert
Watch on
24 25
wx
E-11