Uniden UM525 Owner's Manual page 41

UM525 Paper OM.fm Page 41 Tuesday, January 4, 2005 2:54 PM
Setting a WHAM Base ID
The WHAM base ID for the radio and the WHAM microphone you are installing must
be the same.
1. Rotate PUSH/SELECT to select BASE ID, then press PUSH/SELECT to select
it. The cursor moves to the first character of the base ID.
2. Rotate PUSH/SELECT clockwise to move forward through the displayed
numbers or counterclockwise to move backward. When the number you want
appears, press PUSH/SELECT to select it. The cursor moves to the next
number.
3. Repeat Step 2 for each of the base ID's numbers. When you have entered all of
the base ID's numbers, hold down PUSH/SELECT. A confirmation screen
appears.
4. If the base ID you set appears correctly, rotate PUSH/SELECT to select YES. The
radio saves the base ID you input. Otherwise, rotate PUSH/SELECT to select
NO.
5. Turn the radio off then turn it back on to enable the base ID you set.
Setting a WHAM Link Channel
The link channel between the radio and the WHAM microphone you are installing
must be the same. You can select 20 link channels.
1. Rotate PUSH/SELECT to select LINK CH, then press PUSH/SELECT to select
it. LINK CH and a channel number appear.
2. Rotate PUSH/SELECT clockwise to move forward through the displayed
numbers or counterclockwise to move backward. When the number you want
appears, press PUSH/SELECT to select it. A confirmation screen appears.
3. If the channel number you set appears correctly, rotate PUSH/SELECT to select
YES. The radio saves the channel number you input. Otherwise, rotate PUSH/
SELECT to select NO.
4. Turn the radio off then turn it back on to enable the base ID you set.
Setting a WHAM x 4 Base ID
The base ID between the radio and the WHAM x 4 microphone you are installing
must be the same.
1. Rotate PUSH/SELECT to select BASE ID, then press PUSH/SELECT to select
it. BASE ID and a channel number appear.
2. Rotate PUSH/SELECT clockwise to move forward through the displayed
numbers or counterclockwise to move backward. When the number you want
appears, press PUSH/SELECT to select it. A confirmation screen appears.
Using the Radio's Menus
41