Uniden UM525 Owner's Manual page 12

UM525 Paper OM.fm Page 12 Tuesday, January 4, 2005 2:54 PM
2. To enter the first digit of the user MMSI, rotate PUSH/SELECT until the digit
appears, then press PUSH/SELECT. The digit you entered appears and the flash-
ing cursor moves to the next position.
3. Repeat Step 2 for each of the user MMSI's digits. When you
have entered each of the user MMSI's digits, a confirmation
screen appears.
4. If the displayed user MMSI is correct, rotate PUSH/SELECT to select YES, then
press PUSH/SELECT to confirm it. The setup menu appears.
Otherwise, If the displayed user MMSI is not correct, rotate PUSH/SELECT to
select NO, then press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to
enter the correct user MMSI.
If you are new to using a marine radio, be sure to read "About Digital Selective Calling"
on Page 6 for a quick background on DSC technology. The first thing you will need to
do is connect an antenna and power to the radio. Then you will need to install the
radio aboard your vessel. See "Connecting the Antenna" on Page 15, "Connecting
Power" on Page 15, and "Installation" on Page 15 if you need any help doing this.
12
USER MMSI
685749638
YES
NO
Understanding Your Radio
16