Radio Setup Menu - Uniden MHS335BT Owner's Manual

MENU ITEM
SOS Strobe
Inactivity Timer
Key Assignment
Reset Radio to
Factory

RADIO SETUP Menu

RADIO SETUP
Use the
rename channels, set channel modes, etc.
MENU ITEM
Channel Mode
Weather Radio
Dual/Tri Watch
Priority Channel
2nd Priority
Channel
Scan Type
Scan Pause
Timer
Channel Name
Noise Cancel
Receive Audio
Pitch
DESCRIPTION
The LED on the front of the radio acts as a strobe light. Set water
activation and timeout duration here.
Set how long the radio remains inactive before it times out.
Reassign soft key functions to different keys.
Return your radio to the factory defaults. You will lose all
programming.
menu to fine tune how the radio will operate. For example, you can
DESCRIPTION
Set to USA, CAN (Canada), or INTL (International). (See page
E-27.)
Turn weather alerts on or off (see page E-27) and enter S.A.M.E
codes (see page E-27).
Turn Dual or Triple Watch on and off (see page E-19).
Select a channel to be the priority channel when scanning. (See
page E-17.)
Select a channel to be the secondary priority channel when
scanning. (See page E-17.)
Select a scanning type: Priority Scan or Memory Scan (see page
E-17.)
Set how long scanning will pause when the SCAN soft key is
pressed.
Rename a channel (see page E-41).
Select noise cancelling for received or transmitted signals.
Set audio pitch.
- Normal
- Mid Range
- Highs & Lows Boost
- Lows Boost
- Highs Boost
Uniden MHS335BT Radio Owner's Manual E-11