Setting Up A Group Mmsi; Setting Up A User Mmsi - Uniden UM525 Owner's Manual

UM525 Paper OM.fm Page 42 Tuesday, January 4, 2005 2:54 PM
3. If the base ID you set appears correctly, rotate PUSH/SELECT to select YES. The
radio saves the base ID you input. Otherwise, rotate PUSH/SELECT to select NO.
Setting the WHAM Sub Radio Mode
You can set up the radio so connected WHAM and WHAM x 4 microphones can
communicate with each other.
1. Rotate PUSH/SELECT to select SUB RADIO, then press PUSH/SELECT to
select it. SUB RADIO and ON and OFF appear.
2. To turn on the sub radio mode, rotate PUSH/SELECT to select ON, then press
PUSH/SELECT to confirm it. The sub radio mode is turned on.
Otherwise, to turn off the sub radio mode, rotate PUSH/SELECT to select OFF,
then press PUSH/SELECT to confirm it.

Setting Up a Group MMSI

You can program a group MMSI. A group MMSI is 9 digits in length.
1. Rotate PUSH/SELECT to select GROUP MMSI, then press
PUSH/SELECT to select it.
2. To enter the first digit of the group MMSI, rotate PUSH/SELECT until the digit
appears, then press PUSH/SELECT. The digit you entered appears and the flash-
ing cursor moves to the next position.
3. Repeat Step 2 for each of the group MMSI's digits. When you have entered each
of the group MMSI's digits, a confirmation screen appears.
4. If the displayed group MMSI is correct, rotate PUSH/SELECT to select YES, then
press PUSH/SELECT to confirm it.
Otherwise, If the displayed group MMSI is not correct, rotate PUSH/SELECT to select
NO, then press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to enter the
correct group MMSI.

Setting Up a User MMSI

When you first turn on the radio, you must program a user MMSI. A user MMSI is 9
digits in length.
Important: If you have already set the user MMSI, do not change it unless you
have received a new user MMSI. After you program a user MMSI for the first time,
you can only change it once more. If you try to change the user MMSI a third time,
the radio will not accept the change. To change the user MMSI again, you must
return the radio to Uniden for reprogramming.
42
INDIVIDUAL
GROUP
ALL SHIPS
POS.REQUEST
Using the Radio's Menus
16