Address Space In Mixed Mode - Siemens SIMATIC ET 200SP Manual

Drivers, parameters, diagnostics messages and address space
A.9 Address space in mixed mode
A.9

Address space in mixed mode

Abbreviations
● "IB" stands for input byte, that is, the module start address in the input area
● "QB" stands for output byte, that is the module start address in the output area
● "DI" stands for digital input
● "DQ" stands for digital output
● "QDIn" stands for the value status (QI) of digital input n
● "QDQn" stands for the value status (QI) of digital output n
● "QAIn" stands for value status (QI) of analog input n
● "QC"stands for Quality Code
Mixed mode
The following tables show the assignment of the address space of the I/O module in mixed
mode.
The addresses for the HART range are not available if no HART variables or no multiHART
ranges have been configured in the properties dialog of the I/O module.
Input area
EB x +
0...1
:
30...31
32
33
34
35
36
37
38
39
40
:
:
HART range
When HART variables or multiHART ranges are used, they come straight after the QI bits of
the HART range digital outputs.
The structure of the HART range depends on the configuration:
74
7 6 5
Analog value, analog input 0
Analog value, analog input 15
QAI7 QAI6 QAI5
QAI15 QAI14 QAI13
DI7 DI6 DI5
DI15 DI14 DI13
QDI7 QDI6 QDI5
QDI15 QDI14 QDI13
QDQ7 QDQ6 QDQ5
QDQ15 QDQ14 QDQ13
Input/output module AI-DI 16/DQ16x24VDC HART HA (6DL1133-6EW00-0PH1)
4 3 2
QAI4 QAI3 QAI2
QAI12 QAI11 QAI10
DI4 DI3 DI2
DI12 DI11 DI10
QDI4 QDI3 QDI2
QDI12 QDI11 QDI10
QDQ4 QDO3 QDQ2
QDQ12 QDQ11 QDQ10
HART range
Manual, 05/2017, A5E39294170-AA
1 0
QAI1 QAI0
QAI9 QAI8
DI1 DI0
DI9 DI8
QDI1 QDI0
QDI9 QDI8
QDQ1 QDQ0
QDQ9 QDQ8