Siemens SIMATIC ET 200SP Manual page 46

Technical specifications
Article number
Encoder supply
Number of outputs
Output voltage encoder supply, min.
Short-circuit protection
24 V encoder supply
● 24 V
● Short-circuit protection
Power loss
Power loss, typ.
Address area
Address space per module
● Address space per module, max.
● Address space per module with HART, max. 82 byte; 34-byte inputs, 2-byte outputs, 40 bytes
● Address space per module with MultiHART,
Digital inputs
Number of digital inputs
Digital inputs, parameterizable
Source/sink input
Input characteristic curve in accordance with
IEC 61131, type 1
Input characteristic curve in accordance with
IEC 61131, type 2
Input characteristic curve in accordance with
IEC 61131, type 3
Pulse extension
● Length
Time stamping
Time stamp (with precision of 1 ms)
Edge evaluation
Input voltage
● Type of input voltage
● Rated value (DC)
● for signal "0"
● for signal "1"
Input current
● for signal "1", typ.
Input delay (for rated value of input voltage)
46
max.
Input/output module AI-DI 16/DQ16x24VDC HART HA (6DL1133-6EW00-0PH1)
6DL1133-6EW00-0PH1
16
18.2 V
Yes; per channel, electronic
Yes
Yes; Electronic (response threshold 0.7 A to 1.5 A)
4.5 W; without sensor supply
42 byte; Address space per module (analog): 42
bytes. Of which 34 bytes for outputs, 2 bytes for
outputs and 6 bytes for QI information. Address
space per module (digital): 26 bytes. Of which 2
bytes for inputs, 2 bytes for outputs, 18 bytes for
SoE, and 4 bytes for QI information
for HART secondary variables, and 6 bytes for QI
information
70 byte; 34-byte inputs, 2-byte outputs, 24-byte
HART inputs, 4-byte HART outputs, and 6 bytes
for QI information
16
Yes
Yes; P-reading
Yes
No
Yes
Yes
Off, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
Yes; Resolution 10 ms
Yes; Resolution 1ms
Yes; rising edge, falling edge, edge change
DC
24 V
-30 to +5V
+11 to +30V
2.5 mA
Manual, 05/2017, A5E39294170-AA