Siemens SIMATIC ET 200SP Manual page 16

Wiring
3.2 Schematic circuit diagram
Digital outputs/sensor supply DQ/U
Depending on the parameter assignment, either the digital outputs or the sensor supplies of
the module are implemented by channel over the DQ
When the I/O module is configured in mixed mode, the outputs can be used as the sensor
supply.
Digital/analog inputs DI/AI
When the I/O module is configured in mixed mode, the inputs can be configured to be used
by channel as digital or as analog inputs.
16
V
Input/output module AI-DI 16/DQ16x24VDC HART HA (6DL1133-6EW00-0PH1)
/U terminals.
n Vn
Manual, 05/2017, A5E39294170-AA