Replacement Of Batteries In Remote Control - Gree GWC09MB-D3DNK Series Owner's Manual

Replacement of batteries in remote controller
1. Press the back side of remote controller
on the spot marked with "
push out the cover of battery box along
the arrow direction.
2. Replace two No.7 (AAA 1.5V) dry
batteries and make sure the positions of
+ and- polar are correct.
3. Reinstall the cover of battery box.
NOTICE
During operation, point the remote control signal sender at the receiving
window on indoor unit.
● The distance between signal sender and receiving window should be
no more than 8m, and there should be no obstacles between them.
or wireless telephone; remote controller should be close to indoor unit
during operation.
● Replace new batteries of the same model when replacement is
required.
● When you don t use remote controller for a long time, please take out
the batteries.
● If the display on remote controller is fuzzy or there s no display, please
replace batteries.
", and then
battery
reinstall
remove
cover of battery box
11